Napoleon Vector 50 Direct Vent Gas Fireplace

FAQ

What is a linear gas fireplace like the Vector 50?

A linear fireplace is wide and low — the Vector 50 (LV50N-2) frames a 52.75 x 18.62 in ribbon of flame for a modern, architectural look, in contrast to the taller traditional format of square fireplaces.

Is the Vector 50 see-through?

This model is single-sided. If you want one fireplace shared between two rooms, Napoleon makes a see-through version of the Vector — browse our see-through fireplaces to compare.

How much heat does the Vector 50 produce?

Up to 36,000 BTU of natural gas heat. Its LHAD heat-management system allows heat to be redirected from the cavity above the unit, which is what makes a finished feature wall or TV placement above it practical.

What framing does the Vector 50 require?

Plan a minimum framed opening of 65.81 in wide x 73 in high x 20.13 in deep; the fireplace itself is 65.31 x 41.19 x 19.89 in. The tall framing height accommodates the venting and heat management above the firebox.

Can I use the Vector 50 if the power is out?

Yes. Battery backup on its electronic ignition means the burner can still be lit with no household power — a genuine advantage of gas over electric fireplaces in outage-prone areas.

How much does the Vector 50 cost to operate?

At maximum output it uses about 0.36 therms of natural gas per hour — usually 50–60 cents per hour at typical U.S. prices — and Napoleon covers the unit with its President’s Limited Lifetime Warranty.

Is the Vector 50 hot to the touch when running?

The glass front gets extremely hot in use — that is true of every gas fireplace — so the Vector 50 ships with the safety barrier required on modern direct vent units, and its LHAD heat management keeps wall surfaces above it within safe temperatures. Keep children and pets at a distance while it runs.